Building Chemical Supplies (BCS) is a leading supplier of chemical products and equipment for the Australian mining, infrastructure and concrete construction industries.

 

Our company is committed to assisting clients through the supply of quality construction chemicals including coating systems, concrete admixtures, injection resins and concrete repair materials. BCS staff can also provide specialist advice regarding product selection and on site application.

 

New and well-maintained application equipment is available for purchase and/or hire.

Concrete Repair

  1. Nafufill KM 103
    One-component, polymer-modified fine filler for smoother surfaces and levelling. Can be applied by hand or by wet spraying. TDS
  2. Nafufill KM 250 – (QDMR approved)
    One-component, polymer-modified PCC concrete repair compound that can be applied by hand or by wet spraying. Also available with 2 hour fire-rating.  TDS
  3. MC-DUR 1000 Parat 04
    Two-component epoxy resin repair mortar for levelling of cracks and holes in horizontal surfaces and stabilising of hand rail posts, highly resistant to extreme temperatures. TDS
  4. MC-DUR 1000 Parat 09
    Pigmented, two – component epoxy resin levelling mortar for structural strengthening in horizontal, vertical and overhead applications. TDS
  5. MC-DUR 1200 VK
    Transparent, low viscosity, two-component epoxy resin. Can be used as: primer or a scratch and leveling coat, to produce reaction resin mortars and for the filling of cracks. TDS
  6. MC-DUR 1264 FF – (QDMR approved)
    Two-component epoxy resin. Low viscosity, good capillary climbing ability, moisture-compatible, long processing time, good adhesion to concrete and steel. Used for the structural injection of cracks and voids. TDS
  7. MC-DUR 1264 KF – (QDMR approved)
    Two-component epoxy resin. Ultra low viscosity, good capillary climbing ability, long processing time, good adhesion to concrete and steel, good chemical resistance. Used for the structural injection of cracks and voids. TDS
  8. MC-DUR 3500 Series
    Rapid-curing, two-component acrylate-based polymer-mortar. Pourable and stuffing consistency for the repair of bridge-bearing, industrial floorings and cold storage rooms.TDS (MC-DUR 3500 A) , TDS (MC-DUR 3500)  Brochure 3500KH
  9. MC-Fastpack PU solid
    High reactive universal adhesive for rigid binding of concrete and steel. Adhesive for surface packers and crack sealing; also suitable for damp surfaces. TDS
  10. MC-FIX ST
    Hydraulically quick-setting repair grout for water seepage and leaks. Free of chlorides, watertight, hardens approx. one minute after water is added. TDS
  11. Zentrifix F92
    Two-component, crack-bridging polymer-cement mixture for concrete protection against carbonation, chloride and root ingress. TDS, Brochure Zentrifix F92 
  12. Injection hose system
    Slotted injection hose with weaving for multiple injections for use with EP, PU and AC. Also available as perforated injection hose with weaving for multiple injections for use with PU, AC and cementitious pastes and suspensions. Brochure Injection Hose system
  13. MC-Fastpack
    Various injection materials such as water stopping and sealing polyurethanes, epoxies, surface sealers before injection and adhesive for the bonding of surface packers in cartridges for easy application. Brochure MC-Fastpack

 

Underground Construction and Tunnelling

  1. Centricrete UF
    Rigid binding cement suspension for injection. Ultra low viscosity, long pot life, high volume stability, very good compressive and bending tensile strength. TDS
  2. MC-DUR 1000 Parat 04
    Two-component epoxy resin repair mortar for levelling of cracks and holes in horizontal surfaces and stabilizing of hand rail posts, highly resistant to extreme temperatures. TDS
  3. MC-DUR 1000 Parat 09
    Pigmented, two – component epoxy resin levelling mortar for structural strengthening in horizontal, vertical and overhead applications. TDS
  4. MC-DUR 1264 FF – (QDMR approved)
    Two-component epoxy resin. Low viscosity, good capillary climbing ability, moisture-compatible, long processing time, good adhesion to concrete and steel. Used for the structural injection of cracks and voids. TDS
  5. MC-DUR 1264 KF – (QDMR approved)
    Two-component epoxy resin. Ultra low viscosity, good capillary climbing ability, long processing time, good adhesion to concrete and steel, good chemical resistance. Used for the structural injection of cracks and voids. TDS
  6. MC-DUR 3500 Series
    Rapid-curing, two-component acrylate-based polymer-mortar. Pourable and stuffing consistency for the repair of bridge-bearing, industrial floorings and cold storage rooms. TDS (MC-DUR 3500A),  TDS (MC-DUR 3500 KH)Brochure 3500KH
  7. MC-FIX ST
    Hydraulically quick-setting repair grout for water seepage and leaks. Free of chlorides, watertight, hardens approx. one minute after water is added TDS
  8. MC-Injekt 2033 – (QDMR approved)
    Low viscosity injection foam for water stopping through cracks, joints and voids; Sets in seconds and increases its volume by approx. 40 times. TDS
  9. MC-Injekt 2300 NV – (QDMR approved)
    Two-component low viscosity, flexible injection resin based on polyurethane for permanent water sealing of cracks and joints to enhance durability in concrete structures such as crash barriers, car parks and tunnels. TDS,  Brochure MC-Injekt 2300NV
  10. MC-Injekt 2700 Series
    Two-component low viscosity, rigid polyurethane injection resin for sealing and filling of cracks and voids; Ground and rock stabilisation. TDSBrochure MC-Injekt 2700
  11. MC-Injekt GL 95
    Soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDSMC-Injekt GL 95 TX
  12. MC-Injekt GL 95 TX
    Polymer-modified soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDS,  Brochure MC-Injekt GL 95 TX
  13. MC-Injekt TS 07
    Low viscosity resin for water tightening and strengthening in masonry and fine media soils. TDSBrochure MC-Injekt TS 07
  14. Zentrifix F92
    Two-component, crack-bridging polymer-cement mixture for concrete protection against carbonation, chloride and root ingress. TDSBrochure Zentrifix F92 
  15. Nafufill KM 250 – (QDMR approved)
    One-component, polymer-modified PCC concrete repair compound that can be applied by hand or by wet spraying. Also available with 2 hour fire rating. TDS

To Top

 

Fire rated Products

  1. Nafufill KM 250 – (QDMR approved)
    One-component, polymer-modified PCC concrete repair compound that can be applied by hand or by wet spraying. This Material has a 2 hour fire-rating.  TDS,  Brochure Nafufill KM250 
  2. MC-Injekt 2300 plus – (QDMR approved)
    Two-component, low viscosity, flexible injection resin for permanent water sealing of cracks and joints. TDSBrochure MC-Injekt 2300

 

To Top

 

Waterproofing

  1. MC FIX-ST
    Hydraulically quick-setting repair grout for water seepage and leaks. Free of chlorides, watertight, hardens approx. one minute after water is added. TDS
  2. MC-Injekt 2033 – (QDMR approved)
    Low viscosity injection foam for water stopping through cracks, joints and voids; Sets in seconds and increases its volume by approx. 40 times. TDS
  3. MC-Injekt 2300 NV – (QDMR approved)
    Two-component low viscosity, flexible injection resin based on polyurethane for permanent water sealing of cracks and joints to enhance durability in concrete structures such as crash barriers, car parks and tunnels. TDS,  Brochure MC-Injekt 2300 NV
  4. MC-Injekt 2700 series
    Two-component low viscosity, rigid polyurethane injection resin for sealing and filling of cracks and voids; Ground and rock stabilisation. TDSBrochure MC-Injekt 2700
  5. MC-Injekt GL 95
    Soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDSBrochure MC-Injekt GL 95 TX
  6. MC-Injekt GL 95 TX
    Polymer-modified Soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDSBrochure MC-Injekt GL 95 TX
  7. MC-Injekt TS 07
    Low viscosity resin for water tightening and strengthening in masonry and fine media soils. TDS, Brochure MC-Injekt TS07  
  8. Injection hose system
    Slotted injection hose with weaving for multiple injections for use with EP, PU and AC. Also available as perforated injection hose with weaving for multiple injections for use with PU, AC and cementitious pastes and suspensions. Brochure Injection hose systems

To Top

 

Grouts and Theme Parks

  1. Centricrete series
    Mineral-based suspensions and ultra-fines for rigid crack injection, filling of voids in masonry and concrete structures. TDS (Centricrete UF)TDS (Centricrete MV)TDS (Centricrete FB)
  2. Emcecrete HP -(QDMR approved)
    High performance grout. TDS
  3. Emcecrete RS -(QDMR approved)
    Rapid set grout. TDS
  4. Masterplas EX
    High fiber polymer-modified base mortar.
  5. Masterplas MW
    Polymer-modified light-weight mortar for overhead application for landscaping and sculpturing. TDSBrochure Masterplas 
  6. Masterplas LW
    Polymer-modified light-weight mortar for high-build application for landscaping and sculpturing. TDSBrochure Masterplas
  7. Injection hose system
    Slotted injection hose with weaving for multiple injections for use with EP, PU and AC. Also available as perforated injection hose with weaving for multiple injections for use with PU, AC and cementitious pastes and suspensions. Brochure Injection hose systems

To Top

 

Surface Protection

  1. Betonflair W
    Ready for use, water-based surface protection system, applied by brush, roller or airless spraying.TDS
  2. EmceColor-Flex
    Ready for use, crack-bridging, water-based surface protection system, applied by brush, roller or airless spraying. TDS
  3. Emcephob Basic Cleaner
    Specialised cleaner to remove graffiti and unwanted paint markings. TDS
  4. Emcephob NanoPerm T / P
    Two-component, water-based carbonation protection system offering permanent protection against graffiti and dirt: can be applied by roller or airless spraying. TDSBrochure Nanoperm T/P
  5. Emcephob NanoPerm LE
    High-performance interior protection coating for high traffic area where walls and surfaces are easily marked like schools and offices.  Brochure Nanoperm LE
  6. Emcephob NanoWax
    Ready to use, transparent, water-based anti-graffiti coating that can be applied by roller or by airless spraying, based on polymer wax dispersions. TDS
  7. Emcephob WM
    Ready for use, water-based hydrophobic agent, reduces the take-up of water and increases resistance to deicing salts. TDS
  8. MC-APC
    Two-component, cement-based, crack-bridging coating for areas in constant contact with water. TDSBrochure MC-APC
  9. MC-DUR 1277 WV
    Transparent, moisture-compatible, two-component epoxy resin. TDS
  10. MC-DUR 2103 M
    One-component, coloured matt, crack bridging polyurethane based binding agent, increases UV-resistant and is non-yellowing. TDS 
  11. MC-DUR 2295
    Coloured, self-levelling, two-component polyurethane based coating for trafficable concrete substrates and at the risk of cracking, for interior and exterior parking areas. TDS
  12. Zentrifix F92
    Two-component, crack-bridging polymer-cement mixture for concrete protection against carbonation, chloride and root ingress. TDSBrochure Zentrifix F92

To Top

 

Potable Water

  1. MC-APC
    Two-component, cement-based, crack-bridging coating for areas in constant contact with water. TDSBrochure MC-APC
  2. MC FIX-ST
    Hydraulically quick-setting repair grout for water seepage and leaks. Free of chlorides, watertight, hardens approx. one minute after water is added. TDS
  3. MC-Injekt 2033 – (QDMR approved)
    Low viscosity injection foam for water stopping through cracks, joints and voids; Sets in seconds and increases its volume by approx. 40 times. TDS
  4. MC-Injekt 2300 NV – (QDMR approved)
    Two-component low viscosity, flexible injection resin based on polyurethane for permanent water sealing of cracks and joints to enhance durability in concrete structures such as crash barriers, car parks and tunnels. TDSBrochure MC-Injekt 2300 NV 
  5. MC-Injekt 2700 series
    Two-component low viscosity, rigid polyurethane injection resin for sealing and filling of cracks and voids; Ground and rock stabilisation. TDSBrochure MC-Injekt 2700
  6. MC-Injekt GL 95
    Soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDS, Brochure MC-Injekt GL 95 TX
  7. MC-Injekt GL 95 TX
    Polymer-modified soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDS, Brochure MC-Injekt GL 95 TX
  8. MC-Injekt TS 07
    Low viscosity resin for water tightening and strengthening in masonry and fine media soils. TDSBrochure MC-Injekt TS 07
  9. Zentrifix F92
    Two-component, crack-bridging polymer-cement mixture for concrete protection against carbonation, chloride and root ingress. TDS, Brochure Zentrifix F92  
  10. MC-RIM PW series
    Cement-bound, mineral-based coating for applications in the drinking water industry; Application by hand or wet spraying. TDS (MC-RIM PROTECT), TDS (MC-RIM PW30)Brochure RIM PW
  11. Pipe Liners and Epoxies
    Epoxies for pipe diameters up to 800mm (please contact us for further details), Brochure Konudur Liner System

To Top

 

Waste Water

  1. Ombran MHP series – Manhole relining system
    Highly sulphate – resistant class 3 (Under German DIN19573) mortar for coating and reprofiling of manholes and sewer shafts. TDSBrochure The Ombram MHP System
  2. Ombran MHP-SP 3000 - Manhole relining system
    Highly sulphate – resistant class 4 (Under German DIN19573) mortar for coating and reprofiling of structures & sewerage systems. TDSBrochure The Ombram MHP System
  3. HDT Blasting and Spinning Unit
    Cleaning and coating of manholes without entering the access shaft. Please see our brochure for more information Brochure HDT presents the MRT unit    Video    Video
  4. Ombran CL
    Cleaner concentrate for oil contaminated substrates like grease traps and separators. TDS
  5. Ombran FT
    Hybrid mortar for coating separators. TDSBrochure CPS and FT
  6. Ombran W
    Expanding plugging mortar to stop water ingress. TDSBrochure W and IW
  7. Ombran IW
    Superfast-hardening mortar for surface-sealing of water ingress. TDSBrochure W and IW
  8. Ombran CPS
    Hybrid Silicate Coating for protection against biogenic sulphuric acid corrosion in sewer systems. TDSBrochure CPS and FT
  9. Pipe Liners and Epoxies
    Epoxy for pipe diameters up to 800mm Please contact us (for further details). Brochure Konudur Liner System 
  10. MC-APC
    Two-component, cement-based, crack-bridging coating for areas in constant contact with water. TDSBrochure MC-APC
  11. MC FIX-ST
    Hydraulically quick-setting repair grout for water seepage and leaks. Free of chlorides, watertight, hardens approx. one minute after water is added. TDS
  12. MC-Injekt 2033 – (QDMR approved)
    Low viscosity injection foam for water stopping through cracks, joints and voids; Sets in seconds and increases its volume by approx. 40 times. TDS
  13. MC-Injekt 2300 NV – (QDMR approved)
    Two-component low viscosity, flexible injection resin based on polyurethane for permanent water sealing of cracks and joints to enhance durability in concrete structures such as crash barriers, car parks and tunnels. TDSBrochure MC-Injekt 2300 NV 
  14. MC-Injekt 2700 series
    Two-component low viscosity, rigid polyurethane injection resin for sealing and filling of cracks and voids; Ground and rock stabilisation. TDSBrochure MC-Injekt 2700
  15. MC-Injekt GL 95
    Soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDSBrochure MC-Injekt GL 95 TX
  16. MC-Injekt GL 95 TX
    Polymer-modified soft elastic, low viscosity, highly flexible injection resin for the outside sealing of tunnel linings, concrete walls, slabs and footings, block walls and expansion joints. Also suitable for curtain membrane injection. TDS, Brochure MC-Injekt GL 95 TX 
  17. MC-Injekt TS 07
    Low viscosity resin for water tightening and strengthening in masonry and fine media soils. TDSBrochure MC-Injekt TS07
  18. Injection hose system
    Slotted injection hose with weaving for multiple injections for use with EP, PU and AC. Also available as perforated injection hose with weaving for multiple injections for use with PU, AC and cementitious pastes and suspensions. Brochure Injection Hose System.

To Top

 

Industrial Flooring for all Industries,

Brochure Flooring systems Overview

  1. Emcefloor series
    One-component, polymer-modified, mineral-based screed mortar. Also suitable for the production and repair of composite screeds. TDSBrochure Emcefloor
  2. MC-DUR 111 D - Car parks and garages
    Coloured, water vapor open, water-dispersed, two-component epoxy resin sealer, dries to a satin finish. TDS
  3. MC-DUR 1177 WV-A - Power plant construction
    Transparent, water-dispersed epoxy resin. Can be applied on green concrete and on highly alkaline mineral substrates TDS
  4. MC-DUR 1200 - Warehouse and production facilities
    Fillable, coloured, self-levelling epoxy resin for high mechanical and chemical loads. TDS, Brochure Metal Industry 
  5. MC-DUR 1204
    Transparent, two-component epoxy resin sealer with highly increased UV stability for use in interior areas with high exposure to light. TDS
  6. MC-DUR 1209 TX - Adhesion of CF-sheets
    Fillable, coloured, self-levelling epoxy resin for high mechanical and chemical loads, thixotropic properties for vertical applications. TDS
  7. MC-DUR 1212 series - Metal-working and Automotive Industry
    Coloured two-component epoxy resin. Production of epoxy resin sealers and self-levelling coatings on mineral substrates. TDS
  8. MC-DUR 1252 - Multistory Car Parks
    Pigmented, UV-resistant, elastic two component epoxy resin. Production of epoxy resin coatings on mineral-based substrates, especially parking decks. TDS
  9. MC-DUR 1280
    Duromer adhesive for CPRP-strips and flat-bar steel for structural strengthening in civil engineering. TDS
  10. MC-DUR 1291-flex
    Crack-bridging coating material used as intermediate layer for MC-protection system 1800. TDS
  11. MC-DUR 1390 VK
    Low-viscosity, transparent, two-component epoxy resin. Can be used as a primer on mineral substrates, binding agent for scratch and levelling coats, filling of cracks and reaction resin mortars. TDS
  12. MC-DUR 1800 series - Chemical Industry
    Coloured, two-component epoxy resin coating with high resistance to acids, alkalis and solvents. TDSBrochure Chemical Industry
  13. MC-DUR 1850 ESD - Automotive and Electronics Industry
    Coloured, two-component epoxy resin coating for ESD (electro-static-discharge) floor coverings requiring increased resistance to mechanical and chemical impacts. TDSBrochure Electronics Industry
  14. MC-DUR 1900 - Chemical Industry
    Coloured, two-component, crack bridging epoxy resin coating. Simple to use for smooth and slip-resistant conductive industrial floors. Also available as nonconductive and high chemical resistance. TDS
  15. MC-DUR 2052 AM - Automotive Industry
    Silicon-free, coloured, self-levelling, two-component polyurethane resin coating for mineral and asphalt-bound substrates exposed to mechanical loadings, e.g., in warehouses, sales and production areas. TDSBrochure Automotive Industry
  16. MC-DUR 2052 UVB
    Coloured, two-component, levelling coat based on polyurethane resin, with increased UV-resistance. For the coating of balconies and access balconies. TDS
  17. MC-DUR 2095 Series - Facility Management
    Coloured, water-dispersed, two-component polyurethane resin to produce electrically conductive sealing coats, UV-resistant and open to water vapor diffusion. TDSBrochure Facility Management
  18. MC-DUR rapid - Fully cured in two days
    Rapid-curing, two-component, coloured epoxy resin system. MC-DUR rapid is self-levelling and can be used for both smooth and slip-resistant industrial floors. TDSBrochure MC-DUR Rapid
  19. MC-DUR SL - one-step application
    Visually superior coating system that is especially quick to apply. Application in interior areas, commercial and industrial areas subject to medium mechanical loadings and low chemical stresses. TDS
  20. MC-DUR Terrazzo – Food, pharmaceutical and chemical industry
    Visually highly decorative, thick-layer coating system allowing ample design for representative areas in commerce/industry, and the pharmaceutical and food sectors. TDS
  21. MC-DUR VS/VS-PUR – Chemical Industry
    Solvent-containing, coloured, two-component polyurethane wearing layer sealer with high resistance to UV, non-chalking and non-yellowing, dries to a satin finish. TDS 
  22. MC-Duroflake – Show rooms, supermarkets and offices
    Visually superior Dekorchips coating system. Application in interior areas in commercial and industrial areas. TDS (Duroflake),  TDS (Duroflake LE)
  23. MC-Durofloor - Food and Pharmaceutical Industry
    Visually superior Colorquarz coating system, able to withstand high stresses.  TDS, Brochure Pharmaceutical Industry 

To Top

 

Roading Materials

  1. Nafutekt plus
    Specialist bridge joint sealant in traffic surfaces. Brochure Nafutekt 
  2. Whisper Grip
    Specialist road coating to increase grip and decrease noise in problem areas in tunnels and above ground. Brochure Whispergrip

To Top

 

Injection Devices

Some examples below. Please contact us directly for our full range of injection devices.

  1. Reciprocation Pump PN 1025 - single component pump. Brochure PN 1025
  2. Reciprocating Pump DESOI AirPower M25-3C VA - two component pump 1:1. DESOI AirPower M25-3C VA
  3. Reciprocating Pump PN 314 3K - two component pump 3:1. Brochure PN 314-3K
  4. Spiral pump SP-Y and SP-14F – worm drive pumps for cementitious material. Brochure SP-Y, Brochure SP14 
  5. Double Membrane Pump MCL1 – membrane pump for cementitious material. Brochure MCL1

 

Hand and electrical pumps are also available. Please contact our office for more details

To Top

 

Injection Packers

Please contact us directly for our full range of packers

  1. Bore Packers starting from 6 mm to 144 mm
  2. Adhesion Packers for low pressure and high pressure injection
  3. Hammer Packers
  4. Wedge packer
  5. Gel packers with and without extension. Brochure Gel packers
  6. Mining and specialist civil engineering packers. Brochure Mining and civil eng packers 
  7. Ground injection lancing systems. Brochure Injection lances
  8. Specialist masonry anchor systems. Brochure Specialist masonry anchors

To Top

 

Mixing technique

Please contact us directly for our full range of mixing devices.

  1. Mixing device MZ-0 ZS-0 Brochure ZS-0
  2. Dualspiral Mixer B6 HZM-1 Brochure HZM-1   
  3. Mixing Device RWU-8 – mixing device mountable to the hopper of spiral pumps SP-10F and SP-14F.  Brochure RWU-8
  4. Mixing device PiccoBrochure Picco RW

To Top

 

Concrete Admixtures and Additives

  1. Brochure Concrete Admixtures 1
  2. Brochure Concrete Admixtures 2

Further information will follow soon please contact us directly in the meantime.

To Top